Nate Adams's Discussions (22)

Discussions Replied To (19) Replies Latest Activity

"Honest Building Science question on this topic: If the drywall of the knee wall is w…"

Nate Adams replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"You caught me being lazy, I don't have time to go look up the ASTM air barrier test…"

Nate Adams replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Thanks for that! "

Nate Adams replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"The purpose of it is more to seal the fiberglass enough to reduce convective losses.…"

Nate Adams replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Sort of. 3.5" fiberglass batts can be R-11, R-13, or R-15. An R-15 batt weighs a ton…"

Nate Adams replied Oct 11, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"James, you could use a better tone there... Like I said, that was early on. I used…"

Nate Adams replied Oct 8, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"I used to work for Guardian Building Products, they sell a perforated reflective ins…"

Nate Adams replied Oct 7, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"I don't think I can get it to 30 seconds, but I can do it in 2-3 minutes with this P…"

Nate Adams replied Feb 18, 2013 to If you had 30 seconds to tell a homeowner what your company does, how would it go?

12 Feb 23, 2013
Reply by Dennis McCarthy

"Patrick, I have had a lot of luck with AL. They say that 85% of their customers are…"

Nate Adams replied Aug 2, 2012 to Thoughts on advertising through Angie's List and\or Service Magic.

10 Aug 6, 2012
Reply by John Redmond

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Bachi Brunato joined Kyle Brown's group
Thumbnail

Wrightsoft - Manual J / Manual D

If you use Wrightsoft to calculate loads or design ducts, you likely have questions.  Get answers…See More
3 hours ago
Colin Genge commented on Greg Labbe's blog post Technical Tape Desecration
"i don't have a picture of it, but my Honda Accord's windshield was replaced and it leaked…"
8 hours ago
terry nordbye replied to Jim Gunshinan's discussion PHIUS+2015 Climate-Specific Passive Building Standard
"Both standards are good. Both standards win. PHI knows how to build a PH in the USA. The very…"
12 hours ago
Greg Labbe replied to Jim Gunshinan's discussion PHIUS+2015 Climate-Specific Passive Building Standard
""It’s important to note that the PHIUS+ 2015 metric is an optimization of the European…"
12 hours ago
Melissa Ulbricht posted a blog post
12 hours ago
David M Cohen added a discussion to the group Job Board
13 hours ago
David M Cohen joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
14 hours ago
Profile IconSarah Mostafa, Michael Kelemen, Sean Maxwell and 3 more joined Home Energy Pros
14 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service