View
| Discussions Replied To (3) | Replies | Latest Activity |
|---|---|---|
"Also to add the pump watts. Are you using the GSHP to supply 100% of the domestic ho…"Dave Dysson replied Aug 5, 2011 to RemRate Water Furnace modeling problem |
5 |
Aug 8, 2011 Reply by Elizabeth Guinn |
"I was looking at REM/Rate and the GSHP only needs COP entered. It looks like you onl…"Dave Dysson replied Aug 5, 2011 to RemRate Water Furnace modeling problem |
5 |
Aug 8, 2011 Reply by Elizabeth Guinn |
"Is the chimney lined? It could be from flue gases from an unlined chimney. Any probl…"Dave Dysson replied Jan 23, 2011 to Chimney condensation in attic |
3 |
Jan 25, 2011 Reply by Steven Lewis |
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Mark Richardson replied to J.C. Martel's discussion Disasters & sustainable energy
Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Bachi Brunato's discussion was featured
Johnny Ritzo's discussion was featured
Tom Delconte's blog post was featured
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post© 2013 Created by Lawrence Berkeley National Laboratory.