View
| Discussions Replied To (4) | Replies | Latest Activity |
|---|---|---|
"if the duct leakage is relatively low, 200 cfm or less, the pressure in the duct sys…"Paul Morin replied Jan 10 to Duct Testing High Velocity Systems |
2 |
Jan 10 Reply by Paul Morin |
"Darrell, I am confused by your last paragraph: ‘I’m not suggesting that we disconti…"Paul Morin replied Oct 25, 2012 to Questioning W.C.C. |
4 |
Oct 26, 2012 Reply by Darrel Tenter |
"This article (http://www.ncbi.nlm.nih.gov/pubmed/17587417) shows that the measured c…"Paul Morin replied Aug 30, 2012 to Blower Door Depressurization and the Human Ear |
3 |
Aug 30, 2012 Reply by Paul Morin |
"David, you could use the Exhaust Fan Flow Meter to measure air flows above 10 cfm th…"Paul Morin replied Aug 30, 2012 to What is the value of using a pressure pan to test outlets? |
18 |
Sep 5, 2012 Reply by Colin Genge |
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Meagan Foster posted events
Meagan Foster updated an event
Meagan Foster updated an event
Meagan Foster updated an event
Meagan Foster updated an event
Anna Svensson posted a discussion
Bryce Cramer joined Leslie McDowell, BPI's group
Bryce Cramer replied to Mike Kandel's discussion June's Stump the Chump: What's Wrong with this Picture? in the group Building Performance Institute (BPI)
James Hatheway added a discussion to the group Job Board© 2013 Created by Lawrence Berkeley National Laboratory.