Bill Bradbury's Discussions (39)

Discussions Replied To (17) Replies Latest Activity

"Thanks for the link, this is a great app! We do lime plaster finishes on our histori…"

Bill Bradbury replied Dec 2, 2013 to Standard Wall Thermal Upgrade Analysis

1 Dec 2, 2013
Reply by Bill Bradbury

"For natural gas, run only the furnace for a given time, mark the dial difference on…"

Bill Bradbury replied Dec 2, 2013 to Combustion Furnace BTU output

9 Dec 6, 2013
Reply by Bud Poll

"Air sealing a wall like this must be done with a vapor diffusive material or you wil…"

Bill Bradbury replied Mar 18, 2013 to HELP - AIR SEALING a Continuous Stone Interior/ Exterior Wall

14 Apr 18, 2013
Reply by Robert D York Jr

"Yes, a typical annual household heating bill here is about the same, but my client h…"

Bill Bradbury replied Dec 11, 2012 to Eliminating Standing Pilot Light Furnaces

13 Dec 11, 2012
Reply by tedkidd

"1) Turn down the gas pressure, that is a crazy big pilot 2) Replacing this cast iron…"

Bill Bradbury replied Dec 11, 2012 to Eliminating Standing Pilot Light Furnaces

13 Dec 11, 2012
Reply by tedkidd

"Technology has it's place, but legislating the adoption of new(or in this case not s…"

Bill Bradbury replied Nov 30, 2012 to Eliminating Standing Pilot Light Furnaces

13 Dec 11, 2012
Reply by tedkidd

"So glad to hear, good luck!"

Bill Bradbury replied Apr 18, 2012 to How to help new energy pros migrate into our new career as fresh students right out of class

13 Apr 18, 2012
Reply by Bill Bradbury

"Some of the most knowledgeable trades people I know volunteer for Habitat for Humani…"

Bill Bradbury replied Apr 2, 2012 to How to help new energy pros migrate into our new career as fresh students right out of class

13 Apr 18, 2012
Reply by Bill Bradbury

"Hi Tom, I looked over your plans a little closer this morning and there are a couple…"

Bill Bradbury replied Apr 2, 2012 to Applied Passive-solar Structural Design

48 Apr 2, 2012
Reply by Bill Bradbury

"Hi Tom, this is a great idea that has been in use for at least 100 years, but is rar…"

Bill Bradbury replied Mar 31, 2012 to Applied Passive-solar Structural Design

48 Apr 2, 2012
Reply by Bill Bradbury

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Colin Genge updated an event
Thumbnail

Passive House Testing Webinar with Kevin Brennan of the Passive House Academy at Online

September 29, 2015 from 1pm to 2pm
Tests needed to qualify as a passive houseWhy we’re seeing an increase in PH buildingsBest…See More
2 hours ago
Colin Genge updated an event
Thumbnail

DM32 Smart Gauge 101 Webinar at Online

September 22, 2015 from 1pm to 2pm
Webinar Learning Objectives:Gauge settings and operationCalculate results in the gaugeUpdate the…See More
2 hours ago
Colin Genge updated an event
Thumbnail

Blower Door 101 Webinar at Online

September 15, 2015 from 1pm to 2pm
See how easy it is to do your first test. Learn tips to perform your first duct test in only twenty…See More
2 hours ago
Colin Genge updated an event
Thumbnail

Zone Pressure Diagnostics (ZPD) with Bill Eckman of NME$A Webinar at Online

September 10, 2015 from 1pm to 2pm
Benefits and limitations of Zonal Pressure Diagnostics (ZPD).Best practices for accurate…See More
2 hours ago
Colin Genge updated an event
Thumbnail

Problem Solving- Air Tightness Tests of Large Buildings Webinar at Online

September 1, 2015 from 1pm to 2pm
Effect of Stack Pressure during airtightness tests in tall buildings-caluculating the effectsHow…See More
2 hours ago
Kim Tanner posted a discussion

Fantastic innovation

What an awesome example of fantastic innovation!Check out the TrueFlow Capture Box CEE made!…See More
3 hours ago
Amina Lang posted events
3 hours ago
John Kaye is now a member of Home Energy Pros
4 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service