Isaac Savage's Discussions (43)

Discussions Replied To (11) Replies Latest Activity

"Thom, I believe the "notes" in table 5.1 is trying to say that an intermittent kitch…"

Isaac Savage replied Mar 30, 2013 to ASHRAE 62.2.2010 and the $20 app

35 May 10, 2013
Reply by Jim Peck

"Great discussion here. We have also put together an online training on ASHRAE 62.2-2…"

Isaac Savage replied Mar 30, 2013 to ASHRAE 62.2.2010 and the $20 app

35 May 10, 2013
Reply by Jim Peck

"Field controls makes a "fan in a can" that can tie into the furnace, such that the "…"

Isaac Savage replied Aug 16, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"See page two: http://www.karg.com/pdf/ziptest%20pro2%20manual/ti86dtl.pdf"

Isaac Savage replied Aug 9, 2012 to App for Ashrae 62.2

4 Aug 9, 2012
Reply by Isaac Savage

"http://itunes.apple.com/us/app/hvac-resvent-62-2/id404240230?mt=8"

Isaac Savage replied Aug 8, 2012 to App for Ashrae 62.2

4 Aug 9, 2012
Reply by Isaac Savage

"If your attic is considered a "confined space" (less than 50 cubic feet per 1000 btu…"

Isaac Savage replied Jun 2, 2011 to Commercial building - relocating thermal/air barrier

9 Jun 3, 2011
Reply by tedkidd

"50 cubic feet of air per 1000 btu's of input is the code requirement I'm familiar wi…"

Isaac Savage replied Jun 2, 2011 to Commercial building - relocating thermal/air barrier

9 Jun 3, 2011
Reply by tedkidd

"Field Controls has a "fan in a can" product that can be wired to the furnace. A pres…"

Isaac Savage replied Jun 2, 2011 to Commercial building - relocating thermal/air barrier

9 Jun 3, 2011
Reply by tedkidd

"How much is the shipping cost? Have a pdf version, by chance?"

Isaac Savage replied Jun 2, 2011 to New energy rebate guide is now available

1 Jun 2, 2011
Reply by Isaac Savage

"I think option B makes great sense. The air injector fans shouldn't run more than a…"

Isaac Savage replied Jun 2, 2011 to Commercial building - relocating thermal/air barrier

9 Jun 3, 2011
Reply by tedkidd

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Different houses, different problems, different approaches. A multipoint gives you a slope. The…"
15 minutes ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"
20 minutes ago
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"A multi-point will take longer, but what will it do for the home owner?  Will it change the…"
2 hours ago
Sean Lintow Sr replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hmmm good question - personally for air-leakage I would go with multi-point, preferably run from…"
3 hours ago
Richard Beyer posted a discussion

Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"

OFFICE OF THE FIRE MARSHAL1212 WHITTEMORE RDMIDDLEBURY, CONNECTICUT Fire Investigation Report –…See More
14 hours ago
Profile IconDavid Hepinstall and Matthew joined Home Energy Pros
20 hours ago
Steve Leombruno posted a blog post

Static power energy box

Just wondering if You've heard of this Static power energy box that boasts energy consumption…See More
yesterday
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hi Sean, I have a question for you.  If you were only interested in providing the best audit…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service