randy tolowski's Discussions (77)

Discussions Replied To (45) Replies Latest Activity

"Have they stopped the manufacture of furnaces below 90%?"

randy tolowski replied Apr 11, 2013 to Enforcement_Policy_Furnace

4 Apr 11, 2013
Reply by Eric Kjelshus

"Good morning Don, will it have ventilation strategies for homes that are hydronic (r…"

randy tolowski replied Aug 27, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"Yes it is a one time thing. As far as dishonesty, I don't know how it would be advan…"

randy tolowski replied Aug 23, 2012 to Has anyone heard of Greenlet? Me neither until today

8 Aug 23, 2012
Reply by randy tolowski

"I went onto the site and it is running. I started a load of laundry and it is showin…"

randy tolowski replied Aug 20, 2012 to Has anyone heard of Greenlet? Me neither until today

8 Aug 23, 2012
Reply by randy tolowski

"There is Bob, you get $20 per window unit for participation in the program. You also…"

randy tolowski replied Aug 20, 2012 to Has anyone heard of Greenlet? Me neither until today

8 Aug 23, 2012
Reply by randy tolowski

"I think gearing for window units think NY not much central air"

randy tolowski replied Aug 17, 2012 to Has anyone heard of Greenlet? Me neither until today

8 Aug 23, 2012
Reply by randy tolowski

"I just received the greenlet package this is the plugin to the outlet "

randy tolowski replied Aug 13, 2012 to Has anyone heard of Greenlet? Me neither until today

8 Aug 23, 2012
Reply by randy tolowski

"Leslie McDowell wrote on Linkedin "It’s important to note that all training organiz…"

randy tolowski replied Aug 9, 2012 to National "Training Mill" Canned by BPI

18 Aug 22, 2012
Reply by Matthew Redmond

"I just spoke with someone from clean edison in new york. They said they were still t…"

randy tolowski replied Aug 8, 2012 to National "Training Mill" Canned by BPI

18 Aug 22, 2012
Reply by Matthew Redmond

"Only BPI can confirm or deny the allegation.  BPI we're waiting Don't pull a romney…"

randy tolowski replied Aug 7, 2012 to National "Training Mill" Canned by BPI

18 Aug 22, 2012
Reply by Matthew Redmond

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Ethan Bukowiec replied to Ethan Bukowiec's discussion Thoughts on energy startup's new propane smart meter
"Anyone interested in learning more about this device should check out the Kickstarter…"
9 minutes ago
Linda Wigington replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"Here is a response from Frank Bergamachi (Thousand Home Challenge project #4) I’ve looked…"
6 hours ago
Linda Wigington replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"Here is a response from Larry Kinney A few years ago someone had a gee whiz calibrated watt and…"
6 hours ago
Dale@EnergyWright replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"I've used the efergy Elite whole house energy monitor to evaluate 240V HPWHs. I found the…"
6 hours ago
Profile IconDale@EnergyWright and Maria Lacey joined David Eggleton's group
Thumbnail

1000 Home Challenge

Linda Wigington distinguished between deep retrofits & deep energy reductions, thus expanding…See More
7 hours ago
Profile IconAdam Swain, Cynthia Sandherr, James Skeldon and 2 more joined Home Energy Pros
7 hours ago
Tom White posted videos
16 hours ago
Maria Lacey replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"I attempted to use an AZTech device. I have used the Watt Stopper, Watts Up Pro, Kill-A-Watt…"
20 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service