David Meiland's Discussions (147)

Discussions Replied To (129) Replies Latest Activity

"Bud, you got cut off mid-sentence.... can you hear me now??"

David Meiland replied Aug 23, 2014 to Advice for heating a 3-story Vermont home built in 1900?

10 Sep 11, 2014
Reply by richard gaughan

"Bud is right on. Get a professional auditor to assess the building. Finding the righ…"

David Meiland replied Aug 23, 2014 to Advice for heating a 3-story Vermont home built in 1900?

10 Sep 11, 2014
Reply by richard gaughan

"Stephen, curious if you changed back and forth between #2 and #3 and got the same re…"

David Meiland replied Aug 6, 2014 to Which reading is more reliable on a Minneapolis Duct Blaster?

19 Aug 22, 2014
Reply by Paul Morin

"Duct blaster test?"

David Meiland replied Sep 9, 2013 to Underground ductwork

19 Oct 8, 2013
Reply by Bob Blanchette

"I think the place to get your answer is inspectorsjournal.com . The guys there are e…"

David Meiland replied Aug 25, 2013 to Need Help Decoding a Couple of Nameplates

4 Aug 25, 2013
Reply by Om Builder & construction

"Did you observe the flame as the air handler started up? Did it remain stable, or ch…"

David Meiland replied Aug 20, 2013 to Extraordinarily High CO Reading on a Furnace Vent: 3950 PPM

6 Aug 22, 2013
Reply by Eric Kjelshus

"We have a lot of heat pumps here, but there are often control issues so that the hea…"

David Meiland replied Jul 26, 2013 to Easy Tests for HVAC during audit

17 Aug 11, 2013
Reply by R Higgins

"Craig, do you typically see heat pumps, gas furnaces, A/C only, or what?"

David Meiland replied Jul 24, 2013 to Easy Tests for HVAC during audit

17 Aug 11, 2013
Reply by R Higgins

"I think you could do a passable job with a box fan, an anemometer, and a manometer."

David Meiland replied Jul 20, 2013 to Measuring moisture intrusion

6 Jul 28, 2013
Reply by William H Nickerson

"Someone smarter than me could calculate the rate of vapor diffusion through the vari…"

David Meiland replied Jul 20, 2013 to Measuring moisture intrusion

6 Jul 28, 2013
Reply by William H Nickerson

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Different houses, different problems, different approaches. A multipoint gives you a slope. The…"
6 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"
6 hours ago
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"A multi-point will take longer, but what will it do for the home owner?  Will it change the…"
8 hours ago
Sean Lintow Sr replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hmmm good question - personally for air-leakage I would go with multi-point, preferably run from…"
10 hours ago
Richard Beyer posted a discussion

Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"

OFFICE OF THE FIRE MARSHAL1212 WHITTEMORE RDMIDDLEBURY, CONNECTICUT Fire Investigation Report –…See More
20 hours ago
Profile IconDavid Hepinstall and Matthew joined Home Energy Pros
yesterday
Steve Leombruno posted a blog post

Static power energy box

Just wondering if You've heard of this Static power energy box that boasts energy consumption…See More
yesterday
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hi Sean, I have a question for you.  If you were only interested in providing the best audit…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service