John C. Semmelhack's Discussions (9)

Discussions Replied To (9) Replies Latest Activity

"For multi-split systems from the quality manufacturers, plan on roughly $2,500-3,000…"

John C. Semmelhack replied Feb 12 to Whole-house Ductless Mini-split install costs

4 Feb 19
Reply by Jose Macho

"Graham, The U.S. is catching up to Germany very quickly on solar installs. As of the…"

John C. Semmelhack replied Oct 23, 2014 to How does efficiency factor into a grid parity world?

5 Oct 26, 2014
Reply by Bob Blanchette

"HVAC contractor (ideally) drills the 1" hole, then tapes over afterward.  I investe…"

John C. Semmelhack replied Jan 24, 2013 to Measuring fresh air intake ducted to a return and no way of measuring from outside.

22 Feb 7, 2013
Reply by Dale Sherman

"By the way...not sure what climate you're in, but someone should probably should ins…"

John C. Semmelhack replied Jan 24, 2013 to Measuring fresh air intake ducted to a return and no way of measuring from outside.

22 Feb 7, 2013
Reply by Dale Sherman

"There are in-duct measurement techniques that are accurate enough for this purpose.…"

John C. Semmelhack replied Jan 24, 2013 to Measuring fresh air intake ducted to a return and no way of measuring from outside.

22 Feb 7, 2013
Reply by Dale Sherman

"Why are you wondering how much airflow occurs at this intake?   1) Required for Ene…"

John C. Semmelhack replied Jan 24, 2013 to Measuring fresh air intake ducted to a return and no way of measuring from outside.

22 Feb 7, 2013
Reply by Dale Sherman

"Dan,  Good to hear you're evaluating the reduced airflow form the CAR's. I'm intere…"

John C. Semmelhack replied Nov 20, 2012 to AirGenerate Heat Pump Water Heaters - any experience?

5 Nov 20, 2012
Reply by John C. Semmelhack

"Dan,  Have you measured the drop in efficiency/capacity caused by reducing the airf…"

John C. Semmelhack replied Nov 16, 2012 to AirGenerate Heat Pump Water Heaters - any experience?

5 Nov 20, 2012
Reply by John C. Semmelhack

"Yes, this can be done and is done.   Many of the ductless heat pump manufacturers ha…"

John C. Semmelhack replied Nov 10, 2011 to DHPs in MF projects

5 Nov 13, 2011
Reply by Pam Worner

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"I am getting a lot of "bad idea" push back on this.  I fully understand that…"
1 hour ago
Greg Mitchell commented on Larry Ralph Jr's blog post Top 7 Worst Crawl Space Repairs
"Spray Foam should be used in crawlspaces.   To learn about closed cell foam in crawlspaces…"
1 hour ago
Jerry Lawrence posted events
yesterday
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
yesterday
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
yesterday
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service