John Brooks's Discussions (123)

Discussions Replied To (105) Replies Latest Activity

"My take-away from Klote-Example 3 (and the entire Klote Paper) is that the height of…"

John Brooks replied Sep 9, 2012 to Fun with Neutral Pressure Planes (NPP)

87 Sep 9, 2012
Reply by Robert Riversong

"the real world application ...would be for locating and sizing the intentional openi…"

John Brooks replied Sep 9, 2012 to Fun with Neutral Pressure Planes (NPP)

87 Sep 9, 2012
Reply by Robert Riversong

"Robert, Humor me here..... If the tube were the only "significant opening".... Imagi…"

John Brooks replied Sep 9, 2012 to Fun with Neutral Pressure Planes (NPP)

87 Sep 9, 2012
Reply by Robert Riversong

"Just like a Cold Climatist ..... assuming that "your" stack effect is the "positive"…"

John Brooks replied Sep 5, 2012 to Fun with Neutral Pressure Planes (NPP)

87 Sep 9, 2012
Reply by Robert Riversong

"fair enough...I would not suggest opening the windows when it's 35 outside  ...the o…"

John Brooks replied Sep 5, 2012 to Locating the Neutral Pressure Plane

49 Sep 18, 2012
Reply by Bud Poll

"And for another version..... Here are a couple of Illustrations (in-progress) that I…"

John Brooks replied Sep 5, 2012 to Locating the Neutral Pressure Plane

49 Sep 18, 2012
Reply by Bud Poll

"I know af an analytical method .... when the size and the location of the significan…"

John Brooks replied Sep 4, 2012 to Locating the Neutral Pressure Plane

49 Sep 18, 2012
Reply by Bud Poll

"Let me try again. I'm not really trying to locate the NPP when the house is at Negat…"

John Brooks replied Sep 4, 2012 to Locating the Neutral Pressure Plane

49 Sep 18, 2012
Reply by Bud Poll

"Hi Colin, I hope this is not too far off topic..... I found one of your Linked-In qu…"

John Brooks replied Sep 4, 2012 to What is the value of using a pressure pan to test outlets?

18 Sep 5, 2012
Reply by Colin Genge

"Hi Bud, when I look at the chart 3/4", 1-1/2" and 4" .... I see the R-value per inch…"

John Brooks replied Sep 3, 2012 to Using The Sciences To Our Advantage

25 Sep 3, 2012
Reply by Robert Riversong

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Craig Foley posted an event
Thumbnail

NESEA BuildingEnergy '15 at Seaport World Trade Center, Boston

March 4, 2015 from 10:30am to 12:30pm
High-Performance, Green Homes in Residential Real EstateInstructor Craig Foley will present three…See More
yesterday
Casey Gesell posted a video

ThermalDry® Insulated Floor Decking!

Larry Janesky, owner and founder of Dr. Energy Saver is once again On the Job insulating and finishing a basement in the northeast – and introducing a brand new insulation product: ThermalDry Insulated Floor Decking. ThermalDry Floor Decking was…
yesterday
Profile IconBergen Heat, Travis Thom and Amita Singh joined Home Energy Pros
yesterday
Tom White's video was featured

U.S. Department of Education Webinar for HVACR Educators

Rebroadcast from On April 30, 2013 Sharon Miller and Robin Utz of the U.S. Department of Education conducted a one hour webinar for HVACR educators to provide them firsthand information from Washington. Highlights include: * A blueprint to revise…
yesterday
Tom White posted a video

U.S. Department of Education Addresses HVACR Educators 4-30-2013

Rebroadcast from On April 30, 2013 Sharon Miller and Robin Utz of the U.S. Department of Education conducted a one hour webinar for HVACR educators to provid...
yesterday
Nate Adams's discussion was featured
Friday
Bud Poll replied to Bud Poll's discussion CO poisoning in Yarmouth Maine
"Hi Chad, I sure would like to hear the follow-up on what caused the CO issue down there.  As…"
Friday
Chad Mcaulife replied to Bud Poll's discussion CO poisoning in Yarmouth Maine
"I got a call yesterday from a homeowner who had a direct vent furnace installed a year ago and she…"
Friday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service