Bud Poll's Discussions (559)

Discussions Replied To (497) Replies Latest Activity

"John, I'll let Robert answer your question. One more for Robert, If you calculate th…"

Bud Poll replied Sep 21, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"Robert, <Stack (or chimney) effect flow volume and rate is dependent only on delt…"

Bud Poll replied Sep 20, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"Now we are getting somewhere.  If I'm interpreting this correctly, and forgive me if…"

Bud Poll replied Sep 20, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"<Do you have any reference to external static pressure?> Explain.  Are you tal…"

Bud Poll replied Sep 20, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"Ted, getting my sensitivities behind me, you say, < I suspect that stack effect i…"

Bud Poll replied Sep 20, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"Good morning John, <The rate of flow would depend on Delta T, the size of the ope…"

Bud Poll replied Sep 20, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"The three foot head of cold air would weigh approximately 12.4 pa, however, it is th…"

Bud Poll replied Sep 20, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"I'll try to keep this short. Robert, I apologize if I was too defensive and too sens…"

Bud Poll replied Sep 19, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"Hi Ted, this is brutal, but I will try.  First, did you see Don's post on the other…"

Bud Poll replied Sep 18, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

"Robert, I'm glad you started out by agreeing with something :).  I think the biggest…"

Bud Poll replied Sep 18, 2012 to Controlling Passive Air Flow

77 Sep 27, 2012
Reply by Robert Riversong

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Bijou Lulla posted a blog post

ENERGY EFFICIENCY RETROFITS.....IN NUMBERS WE TRUST

There has been much ado about the recent paper published by E2e; Do Energy Efficiency Investments…See More
7 hours ago
Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
Saturday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
Saturday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
Saturday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
Saturday
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
Friday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service