George M. Matthews's Discussions (28)

Discussions Replied To (20) Replies Latest Activity

"Do not lease it from Pawnee leasing. Try to find equipment from a contractor getting…"

George M. Matthews replied Aug 11, 2011 to Energystar V.3 Diagnostic Equipment

8 Aug 11, 2011
Reply by Marshall Newport

"I've got two "pool" clients in Contra Costa County. One is thrilled that he replaced…"

George M. Matthews replied Jul 21, 2011 to How's the water? Managing energy use in Pools.

12 Jul 21, 2011
Reply by Mike Estupinian

"1923 central Berkeley one story two bed, one bath. 5 inches cellulose in attic. No w…"

George M. Matthews replied Jun 13, 2011 to Prevailing insulation levels - what do you see in the field?

5 Jun 14, 2011
Reply by Joseph Lamy

"Here is your fix. Require infrared testing of each job wanting govt money as rebates…"

George M. Matthews replied Jun 11, 2011 to Rebate programs for injection foam? Not sure.

17 Jun 12, 2011
Reply by Erin Buchanan

"Assessed 6.11.11 1954 Tract house, Pleasant Hill, CA 3 inches of cellulose in ceilin…"

George M. Matthews replied Jun 11, 2011 to Prevailing insulation levels - what do you see in the field?

5 Jun 14, 2011
Reply by Joseph Lamy

"I could still use some clarification on the subject. I seem to remember reading that…"

George M. Matthews replied Jun 2, 2011 to Blown fiberglass + blown cellulose

19 Jun 4, 2011
Reply by Joseph Lamy

"George, That is exactly what you want to do, cover the fiberglass and bring it to R3…"

George M. Matthews replied May 31, 2011 to Blown fiberglass + blown cellulose

19 Jun 4, 2011
Reply by Joseph Lamy

"I have a question about how to create a termite viewing area in a PU spray foamed fo…"

George M. Matthews replied May 12, 2011 to Sealing crawlspaces and insulating them with polyurethane foam

16 May 13, 2011
Reply by David Meiland

"My client has a 2300 sf single story house with a perimeter concrete foundation on e…"

George M. Matthews replied May 2, 2011 to Sealing crawlspaces and insulating them with polyurethane foam

16 May 13, 2011
Reply by David Meiland

"My local plumbing supply store just recommended  a Promax GNR 40 in the $500 range w…"

George M. Matthews replied Apr 28, 2011 to Budget Water Heater efficiency upgrades - What works best?

6 May 2, 2011
Reply by Joseph Lamy

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bud Poll replied to Chad Mcaulife's discussion BPI QCI Cert.
"I can't think of any test I've ever taken where I wasn't able to determine what I…"
6 hours ago
jerry gentile replied to Chad Mcaulife's discussion BPI QCI Cert.
"you are spot on my friend-- during the exam I said this is ridiculous--- I have bpi certs for…"
11 hours ago
Eric Kjelshus commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Caculation
"IT all matters,  I lot of sealing,  A lot of air barrier.  A lot of "R" A…"
yesterday
Michael Dunseith posted a status
"BPI Infiltration and Duct leakage (IDL) Certified"
yesterday
Jeremy Begley posted a blog post
yesterday
Kim Burnett joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
yesterday
Kent Mitchell commented on Adam Swain's blog post Top Worst Crawl Space Insulation Ideas
"Hi Adam - It sounds like you may be referring to enclosed crawlspaces - Here in the NW we've…"
yesterday
peter chang replied to Damien Greenfield's discussion Is there is cost saving for you in having a tankless water heater?
"I think it is quite possible the greatest savings will be realized by the lowest volume users. I…"
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service