Craig Bird's Discussions (96)

Discussions Replied To (69) Replies Latest Activity

"Thanks for the input Paul. I think that will be a good solution and is better than j…"

Craig Bird replied Jun 9 to Supply ventilation via inline fan and return duct

6 Jun 13
Reply by Air Track Inc

"I don't really view this as viable solution due to the use of the air handler. If EC…"

Craig Bird replied May 30 to Supply ventilation via inline fan and return duct

6 Jun 13
Reply by Air Track Inc

"What is the magic of that extra 0.5" vs 2 or 3 in?"

Craig Bird replied Oct 29, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"I don't know if this would change your response, but I mentioned an inside Vapor Per…"

Craig Bird replied Oct 29, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Tongue and groove is considered a 15 minute thermal barrier"

Craig Bird replied Oct 29, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Out of curiosity if we were to install R30 in the cavity - what about installing a v…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Sorry guys, I was talking about Spray Foam, not rigid foam. We offer open/closed cel…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Where do you draw the line between "building a spec" and providing a bid? I don't co…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Nice eye on the white stuff - it is only over the octagon area, not the whole roof a…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Ok, now I am going to drop the bomb with this picture. Now is anyone thinking foam?…"

Craig Bird replied Oct 24, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Ethan Bukowiec replied to Ethan Bukowiec's discussion Thoughts on energy startup's new propane smart meter
"Anyone interested in learning more about this device should check out the Kickstarter…"
15 hours ago
Linda Wigington replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"Here is a response from Frank Bergamachi (Thousand Home Challenge project #4) I’ve looked…"
21 hours ago
Linda Wigington replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"Here is a response from Larry Kinney A few years ago someone had a gee whiz calibrated watt and…"
21 hours ago
Dale@EnergyWright replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"I've used the efergy Elite whole house energy monitor to evaluate 240V HPWHs. I found the…"
22 hours ago
Profile IconDale@EnergyWright and Maria Lacey joined David Eggleton's group
Thumbnail

1000 Home Challenge

Linda Wigington distinguished between deep retrofits & deep energy reductions, thus expanding…See More
23 hours ago
Profile IconAdam Swain, Cynthia Sandherr, James Skeldon and 2 more joined Home Energy Pros
23 hours ago
Tom White posted videos
yesterday
Maria Lacey replied to Linda Wigington's discussion Low-cost electricity monitoring: Accuracy & Applications in the group 1000 Home Challenge
"I attempted to use an AZTech device. I have used the Watt Stopper, Watts Up Pro, Kill-A-Watt…"
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service