Craig Bird's Discussions (96)

Discussions Replied To (69) Replies Latest Activity

"Thanks for the input Paul. I think that will be a good solution and is better than j…"

Craig Bird replied Jun 9, 2014 to Supply ventilation via inline fan and return duct

6 Jun 13, 2014
Reply by Air Track Inc

"I don't really view this as viable solution due to the use of the air handler. If EC…"

Craig Bird replied May 30, 2014 to Supply ventilation via inline fan and return duct

6 Jun 13, 2014
Reply by Air Track Inc

"What is the magic of that extra 0.5" vs 2 or 3 in?"

Craig Bird replied Oct 29, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"I don't know if this would change your response, but I mentioned an inside Vapor Per…"

Craig Bird replied Oct 29, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Tongue and groove is considered a 15 minute thermal barrier"

Craig Bird replied Oct 29, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Out of curiosity if we were to install R30 in the cavity - what about installing a v…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Sorry guys, I was talking about Spray Foam, not rigid foam. We offer open/closed cel…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Where do you draw the line between "building a spec" and providing a bid? I don't co…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Nice eye on the white stuff - it is only over the octagon area, not the whole roof a…"

Craig Bird replied Oct 28, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

"Ok, now I am going to drop the bomb with this picture. Now is anyone thinking foam?…"

Craig Bird replied Oct 24, 2013 to Insulation/venting/air barrier for cathedral ceiling

21 Oct 29, 2013
Reply by tedkidd

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Manuel Macias Munoz commented on Chris Dorsi's blog post Habitat X Releases 2015 Position Statement
"After several years of experimentation and testing, achieve to create a system constructive new, to…"
6 minutes ago
Theresa L Gilbride's blog post was featured

Find out whose building some of the best-performing homes in the country today with DOE’s Tour of Zero

Home buyers across the country can find out where the home of the future is available today with…See More
1 hour ago
Profile IconMichael Laurie, Randall Herlihy, Matt Risinger and 1 more joined Home Energy Pros
3 hours ago
Quinn Korzeniecki added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Obama Announced New Actions to Bring Energy Efficiency to Households across the Country

Big news out of The White House last week for the ‪‎clean energy‬ housing sector: HUD and DOE have…See More
4 hours ago
Theresa L Gilbride posted a blog post

Find out whose building some of the best-performing homes in the country today with DOE’s Tour of Zero

Home buyers across the country can find out where the home of the future is available today with…See More
5 hours ago
Colin Genge commented on Chris Laumer-Giddens's blog post Building Science is Worthless...
"We has passive house tester complaining the Aluminum Frame leaked too much so we measured them at…"
6 hours ago
Michael Dunseith posted a photo
7 hours ago
Michael Dunseith replied to Kim Tanner's discussion Fantastic innovation
"It was designed for air handlers to determine the total system air flow. I It would be installed in…"
7 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service