tedkidd's Discussions (366)

Discussions Replied To (276) Replies Latest Activity

"Glen, When they say asinine things you need to point it out, not give it credence.…"

tedkidd replied Aug 20, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"With the advent of PROPERLY SIZED, staged or modulating equipment, which operates  c…"

tedkidd replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"We know they need heat, the thing has been running.   1000 sf may mean quite a few…"

tedkidd replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"  These people are at a major crossroad here.  You are both consultant and contract…"

tedkidd replied Aug 17, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Nice.  That picture and your post are my light bulb of the day.   I'm also grateful…"

tedkidd replied Aug 16, 2012 to Any thoughts on the Aeroseal product?

15 Aug 23, 2012
Reply by Bob Blanchette

"Certainly money can be spent on solutions that will end up using more energy, but is…"

tedkidd replied Aug 16, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"The stuff is basically aerosaulized rubber cement. If the duct is really dirty, crus…"

tedkidd replied Aug 14, 2012 to Any thoughts on the Aeroseal product?

15 Aug 23, 2012
Reply by Bob Blanchette

""Problem" is pretty vague.  Sounds like there are lots of problems with this home.  …"

tedkidd replied Aug 13, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"So, are these people really inclined to go to extraordinary measures, cutting holes…"

tedkidd replied Aug 13, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Awesome!"

tedkidd replied Aug 13, 2012 to On the lighter side....

1 Aug 13, 2012
Reply by tedkidd

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Chad Mcaulife posted photos
5 hours ago
Bob Blanchette commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Calculation
"Infiltration makes a HUGE difference. Look at the heat loads on a windy day vs. a calm one. On a…"
5 hours ago
Bob Blanchette commented on Everblue's blog post Poor HVAC Installation Leads to Increased Energy Use
"That explains a LOT of why HVAC system continue to be sized by the same "rule of thumb"…"
6 hours ago
Profile IconChristian Asdal and Shashank Kirloskar joined Home Energy Pros
6 hours ago
Don Fitchett shared their video on Digg
7 hours ago
Don Fitchett shared their video on StumbleUpon
7 hours ago
Don Fitchett shared their video on Twitter
7 hours ago
Mark posted events
9 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service