Ed Ballard's Discussions (36)

Discussions Replied To (28) Replies Latest Activity

"Chris-----------We blow cantilevers all the time. They are prevelent in splits and s…"

Ed Ballard replied Jan 2, 2012 to Can blown loose insulation be used in cantilever floor?

8 Jan 6, 2012
Reply by Allan G Hurst

"Kent----thanks for clarifing that RESNET does not have their own software. I figured…"

Ed Ballard replied Jan 2, 2012 to Energy Auditing Software and Reporting

29 Jan 10, 2012
Reply by Bruce Navin

"Kent---------------Please excuse my possible ignorance,but could you give more detai…"

Ed Ballard replied Jan 1, 2012 to Energy Auditing Software and Reporting

29 Jan 10, 2012
Reply by Bruce Navin

"I realize you are looking for a manufactured plug, but good old fashioned hi-temp. s…"

Ed Ballard replied Dec 1, 2011 to Proper means to "plug" flue pipes after testing gas appliances.

26 Jan 29
Reply by Andrew Aliferis

"Bruce----------OK my first post  stands as it is similiar to what you are facing. It…"

Ed Ballard replied Nov 13, 2011 to Log Home Retrofit

8 Nov 13, 2011
Reply by Ed Ballard

"Bruce-----------After thinking of my reply, I may have jumped to conclusions. I was…"

Ed Ballard replied Nov 13, 2011 to Log Home Retrofit

8 Nov 13, 2011
Reply by Ed Ballard

"I did a log home several years ago. The main leakage areas were wall, wall corners ,…"

Ed Ballard replied Nov 12, 2011 to Log Home Retrofit

8 Nov 13, 2011
Reply by Ed Ballard

"Sean--- Sorry about the Tigerclaw referance. I meant to say tiger tooth."

Ed Ballard replied Sep 19, 2011 to Securing soffit baffles in existing homes

8 Sep 22, 2011
Reply by Jonathan Beers

"Sean-------I've often thought of using button caps also. What are your thoughts on u…"

Ed Ballard replied Sep 18, 2011 to Securing soffit baffles in existing homes

8 Sep 22, 2011
Reply by Jonathan Beers

"Bud, Thanks for the suggestion. This is always a troublesome area to work in to begi…"

Ed Ballard replied Sep 18, 2011 to Securing soffit baffles in existing homes

8 Sep 22, 2011
Reply by Jonathan Beers

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Bijou Lulla posted a blog post

ENERGY EFFICIENCY RETROFITS.....IN NUMBERS WE TRUST

There has been much ado about the recent paper published by E2e; Do Energy Efficiency Investments…See More
9 hours ago
Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
Saturday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
Saturday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
Saturday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
Saturday
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
Friday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service