Ed Minch's Discussions (20)

Discussions Replied To (18) Replies Latest Activity

"Hey Bud Seems like your description: "A chimney has only one pressure boundary pushi…"

Ed Minch replied Nov 15, 2013 to Are "Stack Effect" and "Chimney Draft" the same?

4 Nov 15, 2013
Reply by Bud Poll

"Not knowing your climate zone, here are some thoughts. 2500 ft2 of well insulated an…"

Ed Minch replied Nov 1, 2013 to Is my HVAC Guy correct? 2 systems instead of 1 system with Dampers

54 Nov 9, 2013
Reply by Curt Kinder

"Bud I think I have come up with a way might make almost everyone happy: Hot air rise…"

Ed Minch replied Oct 25, 2013 to Hot air language

14 Oct 25, 2013
Reply by Ed Minch

"Brad, my belief is that "it depends" is so much a factor here that a study would be…"

Ed Minch replied Oct 19, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Covering the kneewall back serves 3 purposes.  1) it prevents the batts from falling…"

Ed Minch replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Anthony I am not getting that you need to cover the kneewalls according to this prov…"

Ed Minch replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Anthony  Can you cite the code section that requires a back on a kneewall? thanks…"

Ed Minch replied Oct 18, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Bud What you are saying makes sense: "The cold air ends up at the bottom because it…"

Ed Minch replied Oct 9, 2013 to Hot air language

14 Oct 25, 2013
Reply by Ed Minch

"As has been said - very hard to quantify because the starting point varies so much.…"

Ed Minch replied Oct 8, 2013 to Just how much does adding air barrier to a knee wall insulation increase it's performance?

29 Oct 25, 2013
Reply by Jack Baikoff

"Bud "Hot air rises" is true, and I think there is nothing confusing about it. 1) Wha…"

Ed Minch replied Oct 6, 2013 to Hot air language

14 Oct 25, 2013
Reply by Ed Minch

RSS

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Eric Kjelshus yesterday. 4 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy on Thursday. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas on Thursday. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Derrick Brodanex joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
3 hours ago
Eric Kjelshus replied to Steve's discussion Too many BTU's. Too much horsepower?
"Its more about run time with high RH removing, than to large over sized AC unit, in houses.  …"
yesterday
Sarah OConnell posted a blog post

Crowdsourcing for Innovation

Share Your Ideas!Novel Building Envelope Design for Increased Thermal PerformanceIn 2014, more than…See More
yesterday
Colin de Paor is now a member of Home Energy Pros
yesterday
Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
Friday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
Thursday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
Thursday
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
Thursday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service