Thermal Solutions Online Webinar Conference

Event Details

Thermal Solutions Online Webinar Conference

Time: August 22, 2011 from 6pm to 7pm
Location: Online Event
Website or Map: http://www.thesnellgroup.com/…
Event Type: online, conference
Organized By: Deanna Kaiser
Latest Activity: Aug 23, 2011

Export to Outlook or iCal (.ics)

Event Description

The Snell Group has announced they will be presenting a live two-day Thermal Solutions webinar conference September 7-8, 2011 lasting from 11:00 a.m. to 2:00 p.m. EDT. The two webinars each consist of three 45-minute topic segments. Each topic section is followed by a question and answer session with the presenter. Registration is separate for each day of the webinar conference. Groups of four or more please call 1-800-636-9820 to receive a discounted rate.

 

Infrared and Electrical Inspections

Wednesday, Sept 7, 2011 Register Here

This live, online, educational webinar is the first part of the two-day conference and is recommended for any thermographer who is using infrared to inspect electrical systems. This presentation provides an overview of how to inspect in-plant electrical systems, safely and effectively, including what equipment to consider scanning, the conditions needed, typical patterns detected and considerations for prioritizing findings. The discussion will cover the finer points of conducting an efficient and effective inspection including tips for both in-plant and consultant thermographers.

Planned Topics:

Inspecting In-Plant Electrical Systems presented by Dave Sirmans

Infrared Windows and Viewports presented by Roy Huff

How to Prioritize Electrical Faults presented by Harold Van De Ven


Thermal Imaging for Weatherization

Thursday, September 8, 2011 Register Here

This live event is the second part of a two-day Thermal Solutions conference webinar covering some of the best practices of using thermal imaging to inspect residential and small commercial buildings. Inspecting building systems with thermal imaging is arguably one of the most complicated applications for infrared. The variety of construction materials, dynamic weather conditions, and technology limitations one encounters during an inspection often make using IR a challenging endeavor. This presentation will provide an overview of the infrared theory one needs to understand while showing real-world examples of where these theoretical concepts impact a thermographer during a building inspection.

 

Planned Topics:

IR Theory for the Building Thermographer presented by Matt Schwoegler

Cold-Weather Infrared Inspections s presented by Don Thurmond

Buying an Infrared Camera for Weatherization by Matt Schwoegler

 

 

Comment Wall

Comment

RSVP for Thermal Solutions Online Webinar Conference to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
2 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
2 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
5 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
6 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
7 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
8 hours ago
Lars olsen posted a blog post
16 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service