RESCAZ- RESNET Combustion Safety Testing: North Carolina

Event Details

RESCAZ- RESNET Combustion Safety Testing: North Carolina

Time: November 7, 2014 from 6pm to 7pm
Location: Wilmington, NC
City/Town: Wilmington, NC
Website or Map: http://energylogicacademy.com…
Phone: 888-687-6043
Event Type: training
Organized By: Scott Doyle
Latest Activity: Aug 20, 2014

Export to Outlook or iCal (.ics)

Event Description

The health and safety of the home energy auditor’s clients should be the top priority when developing work scopes for a home. The changes that are made to the building enclosure, along with air flows in and through a home can have negative impacts on combustion appliances. Understanding this relationship is step one. Understanding how to test combustion appliances to find limits of safe operation is step two.

In this course we will explore the new RESNET standard for combustion safety testing.

This course is designed for professionals that maintain active HERS Rating Field Inspector or HERS Rater certification with a RESNET HERS Provider. All Raters and RFIs must take and pass the written and simulation exams before 2015.


There will be three trainings in North Carolina.

  • Raleigh, NC: October 14th, 2014
  • Raleigh, NC: October 14th, 2014
  • Wilmington, CO:  November 7th, 2014

Please visit our website for more details or call us at 888-687-6043.

 

Comment Wall

Comment

RSVP for RESCAZ- RESNET Combustion Safety Testing: North Carolina to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
yesterday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
yesterday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
yesterday
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
yesterday
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
Friday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service