Mastering Infrared Thermography

Event Details

Mastering Infrared Thermography

Time: November 9, 2010 from 1pm to 2:30pm
Location: On line, anywhere!
Website or Map: http://www.ecw.org/ir
Event Type: webinar
Organized By: Wisconsin Energy Center with John Snell presenting
Latest Activity: Nov 17, 2010

Export to Outlook or iCal (.ics)

Event Description

If you know of people who want to learn more about using infrared thermography for home inspections, have them tune into the upcoming webinar that I'll be presenting for the Wisconsin Energy Center on Tuesday, November 9th from 1:00-2:30 CST. See http://www.ecw.org/ir for details. I've packed a lot into this webinar and it is strictly non-commercial. You can't master the technology in 1.5 hours but you can create a horizon to aim for and that is exactly what my goal is.

Please note that a Fluke TiR1 imaging system (a great unit to use for building inspections!) will be given away by the webinar sponsor, Fluke, to a very lucky participant! You can also have as many people as you want listening in for one registration fee so plan to have the whole crew on hand if you can.

I hope you can join me.

Thinking Thermally!
John Snell

Comment Wall

Comment

RSVP for Mastering Infrared Thermography to add comments!

Join Home Energy Pros

Comment by John Snell on November 17, 2010 at 3:16pm
The webinar went very nicely. We had nearly 450 people attending from 30+ states, 4 Canadian provinces and several foreign countries. The session is also now available now on-demand (http://www.ecw.org/ir) for an $89 fee.
Comment by John Snell on November 3, 2010 at 5:48pm
Regardless of whether or not you already use thermal imaging for building work and, if you do, regardless of the kind of imager you use, please join me for this exciting and informative event. I can assure you your time will be very well invested!

Attending (6)

Might attend (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
12 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
15 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
yesterday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
yesterday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
yesterday
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
yesterday
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service