Intro to designPH: The New Sketchup Plug-in for PHPP

Event Details

Intro to designPH: The New Sketchup Plug-in for PHPP

Time: June 8, 2014 from 9am to 4:30pm
Location: Vermont Energy Investment Corporation
Street: 128 Lakeside Avenue, Suite 401,
City/Town: Burlington, VT 05401
Website or Map: http://www.passivehouse.ca/in…
Phone: andrew@passivehouse.ca
Event Type: course
Organized By: Andrew Peel
Latest Activity: May 19, 2014

Export to Outlook or iCal (.ics)

Event Description

In this one-day course, participants will learn how to use designPH for the design and certification of Passive House buildings. Participants will be guided step-by-step through the building design process, from building model creation to exporting to PHPP. A major focus will be on iterative design to achieve the Passive House criteria. A case study will provide participants with practical experience in completing and documenting a designPH model for building certification.

Learning Objectives:

1.Create a 3D model of a building in designPH and assign key building design attributes.
2.Calculate a simplified annual energy balance for the building and iteratively refine the model to achieve the Passive House criteria
3.Determine key building characteristics and export them for importing into PHPP and documentation for Passive House certification.
4.Gain practical experience in residential building modelling in designPH to support Passive House design and energy calculations.

Comment Wall

Comment

RSVP for Intro to designPH: The New Sketchup Plug-in for PHPP to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
5 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
6 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
8 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
9 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
10 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
11 hours ago
Lars olsen posted a blog post
19 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service