Intro to designPH: The New Sketchup Plug-in for Passive House

Event Details

Intro to designPH: The New Sketchup Plug-in for Passive House

Time: June 16, 2014 from 9am to 4:30pm
Location: Association for Energy Affordability,
Street: 505 Eighth Avenue at West 35th St,
City/Town: New York
Website or Map: http://www.passivehouse.ca/de…
Phone: andrew@passivehouse.ca
Event Type: course
Organized By: Andrew Peel
Latest Activity: May 19, 2014

Export to Outlook or iCal (.ics)

Event Description

In this one-day course, participants will learn how to use designPH for the design and certification of Passive House buildings.  Participants will be guided step-by-step through the building design process, from building model creation to exporting to PHPP.  A major focus will be on iterative design to achieve the Passive House criteria.  A case study will provide participants with practical experience in completing and documenting a designPH model for building certification.

Learning Objectives

1.Create a 3D model of a building in designPH and assign key building design attributes.
2.Calculate a simplified annual energy balance for the building and iteratively refine the model to achieve the Passive House criteria
3.Determine key building characteristics and export them for importing into PHPP and documentation for Passive House certification.
4.Gain practical experience in residential building modelling in designPH to support Passive House design and energy calculations.

Comment Wall

Comment

RSVP for Intro to designPH: The New Sketchup Plug-in for Passive House to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jerry Lawrence posted events
21 hours ago
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
22 hours ago
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
23 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
23 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
yesterday
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
yesterday
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"Great thought! I think that would work. I'll have to put the cost together and see where I…"
yesterday
Danny Gough replied to Tony Hicks's discussion Slab-on-grade Insulation
"This is a tough detail because the foam on the edge of a slab doesn't provide sufficient…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service