Houses That Work for Existing Homes: Remodeling for Energy Efficiency - Chicago

Event Details

Houses That Work for Existing Homes: Remodeling for Energy Efficiency - Chicago

Time: June 8, 2012 from 8:30am to 4:30pm
Location: Chicago Marriott Oak Brook
Street: 1401 W. 22nd Street
City/Town: Oak Brook
Website or Map: http://www.marriott.com/hotel…
Phone: 630-573-8555
Event Type: training
Organized By: Nancy Bakeman
Latest Activity: May 23, 2012

Export to Outlook or iCal (.ics)

Event Description

Chicago-Houses That Work for Existing Homes:

Existing Homes: Remodeling for Energy Efficiency

  • Learn the fundamentals of air, heat and moisture flow and see how they can be applied to remodeling existing homes to make them more efficient, safe, healthy, durable and comfortable.
  • Apply the building science to common remodel projects such as roofing, re-siding, weatherization, kitchen & bath replacements, windows, foundation & basements and HVAC upgrades.
  • Identify process changes needed to cost effectively implement energy efficiency in remodel projects
  • Learn about the successes of other remodelers who have benefited from implementing energy efficiency objectives into remodel projects.

Comment Wall

Comment

RSVP for Houses That Work for Existing Homes: Remodeling for Energy Efficiency - Chicago to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
1 minute ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
49 minutes ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
1 hour ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
3 hours ago
Lars olsen posted a blog post
10 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
21 hours ago
Hans Joachim Preiss replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Good discussion. I came across this comprehensive presentation by Gas Consultants on the effects at…"
22 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Excellent reply Hans. I think that there isnt' a good general answer to this question but that…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service