Houses That Work for Existing Homes: Remodeling for Energy Efficiency

Event Details

Houses That Work for Existing Homes: Remodeling for Energy Efficiency

Time: May 23, 2012 from 8:30am to 4:30pm
Location: TEP/UniSource Energy Headquarters
Street: 88 E. Broadway
City/Town: Tucson
Website or Map: http://maps.google.com/maps?q…
Phone: 952-881-1098
Event Type: training
Organized By: Nancy Bakeman
Latest Activity: May 23, 2012

Export to Outlook or iCal (.ics)

Event Description

Tucson Houses That Work for Existing Homes:

This educational session explores cost-effective opportunities to implement energy efficient and green technologies and strategies into remodeling projects for existing homes.  The fundamentals of building science - air, heat and moisture flow - are applied to help participants understand how elements of a house all work together as a system and how this knowledge can be used by remodelers to reduce risks and find the most cost-effective energy improvements for individual homes.

Comment Wall

Comment

RSVP for Houses That Work for Existing Homes: Remodeling for Energy Efficiency to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
2 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
3 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
4 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
5 hours ago
Lars olsen posted a blog post
12 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
23 hours ago
Hans Joachim Preiss replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Good discussion. I came across this comprehensive presentation by Gas Consultants on the effects at…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Excellent reply Hans. I think that there isnt' a good general answer to this question but that…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service