Free Webinar: Introduction to Energy Modeling w/ OpenStudio

Event Details

Free Webinar: Introduction to Energy Modeling w/ OpenStudio

Time: January 16, 2014 from 1pm to 2:30pm
Location: Webinar
Event Type: webinar
Organized By: Marek Loder
Latest Activity: Jan 16, 2014

Export to Outlook or iCal (.ics)

Event Description

NREL’s OpenStudio(OS) platform for EnergyPlus is changing the way building professionals approach energy modeling – and cost-effective energy modeling is now possible…are you prepared for the shift? 

Join PSD on January 16th, 2013 @ 1:00pm for a FREE 1.5 hour-long webinar that will introduce you to the OpenStudio Energy Modeling ecosystem.  In the webinar, we'll demonstrate how to develop complex energy models and effective modeling workflows, apply crowd-sourced model components and improvements, and analyze models to rapidly identify design and improvement opportunities, and much more…

 As a licensed OpenStudio training and support organization, PSD is offering this webinar to raise awareness of the potential power of OpenStudio. The webinar will be led by Chris Balbach, PSD’s Vice President of Research and Development.  Chris is the Chair and lead instructor for the AEE BESA Certification and has been an active member of the energy modeling community for over 10 years.

 Register now openstudiotraining.com

Comment Wall

Comment

RSVP for Free Webinar: Introduction to Energy Modeling w/ OpenStudio to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
9 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
9 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
12 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
13 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
14 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
15 hours ago
Lars olsen posted a blog post
22 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service