An Introduction to Energy Modeling with OpenStudio

Event Details

An Introduction to Energy Modeling with OpenStudio

Time: January 16, 2014 from 1pm to 2:30pm
Location: Philadelphia, PA
Website or Map: http://psdconsulting.com/open…
Event Type: webinar
Organized By: Chris Balbach
Latest Activity: Jan 9, 2014

Export to Outlook or iCal (.ics)

Event Description

NREL’s OpenStudio(OS) platform for EnergyPlus is changing the way building professionals approach energy modeling – and cost-effective energy modeling is now possible…are you prepared for the shift?

Join PSD on January 16th, 2013 @ 1:00pm for a FREE 1.5 hour-long webinar that will introduce you to the OpenStudio Energy Modeling ecosystem.  In the webinar, we'll demonstrate how to develop complex energy models and effective modeling workflows, apply crowd-sourced model components and improvements, and analyze models to rapidly identify design and improvement opportunities, and more..  

As a licensed OpenStudio training and support organization, PSD is offering this webinar to raise awareness of the potential power of OpenStudio. The webinar will be led by Chris Balbach, PSD’s Vice President of Research and Development. As an active member of the energy modeling community for over 10 years, and Chair of the AEE BESA Certification and lead instructor, Chris has led training courses on energy modeling to hundreds of engineers.

Register now openstudiotraining.com

Comment Wall

Comment

RSVP for An Introduction to Energy Modeling with OpenStudio to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Different houses, different problems, different approaches. A multipoint gives you a slope. The…"
4 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"
4 hours ago
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"A multi-point will take longer, but what will it do for the home owner?  Will it change the…"
6 hours ago
Sean Lintow Sr replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hmmm good question - personally for air-leakage I would go with multi-point, preferably run from…"
8 hours ago
Richard Beyer posted a discussion

Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"

OFFICE OF THE FIRE MARSHAL1212 WHITTEMORE RDMIDDLEBURY, CONNECTICUT Fire Investigation Report –…See More
18 hours ago
Profile IconDavid Hepinstall and Matthew joined Home Energy Pros
yesterday
Steve Leombruno posted a blog post

Static power energy box

Just wondering if You've heard of this Static power energy box that boasts energy consumption…See More
yesterday
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hi Sean, I have a question for you.  If you were only interested in providing the best audit…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service