Event Details

10 Hour OSHA Training Event

Time: December 19, 2011 at 9am to December 20, 2011 at 3pm
Location: Green Jobs Training Center
Street: 102-10 159 rd 2nd fl
City/Town: Howard Beach NY 11414
Website or Map: http://greenjobtrainingcenter…
Phone: 718-659-1205
Event Type: training, event
Organized By: Green Jobs Training Center
Latest Activity: Nov 29, 2011

Export to Outlook or iCal (.ics)

Event Description

NYC requires that all construction superintendents attend the 10 hour Construction Safety Course. NYS now require that all site personnel attend the OSHA 10 hr for all State funded projects in excess of $250,000.00.

This course gives an introduction to OSHA, the standards, general safety and health provisions, the general duty clause and requirements for competent persons. The course then continues with specific emphasis on the Electrical standard and Fall Protection. Topics that may also be covered as needed include Personal Protective Equipment, Tools-Hand and Power, Scaffolds, Cranes & Conveyors, Excavations, Stairways and Ladders. Upon successful completion of the course the student receives a 10 hour Construction Safety Training card which does not expire. Refresher training is recommended to maintain awareness of changes in OSHA regulations and basic competencies.

This training course has BPI CEU's attached for BPI certified professionals attending.

Comment Wall

Comment

RSVP for 10 Hour OSHA Training Event to add comments!

Join Home Energy Pros

Attending (1)

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion How our ceramic based RCC works in the group Radiant Control Coatings
"Hey Tom, I will find the ORNL repoprt and post it.  It was a test on a ballasted roof sample.…"
5 hours ago
Tom Mallard replied to Hal Skinner's discussion How our ceramic based RCC works in the group Radiant Control Coatings
"So it seems that what you're saying is for heat-transfer the stuff has little resistance or…"
6 hours ago
Hal Skinner added a discussion to the group Radiant Control Coatings
Thumbnail

How our ceramic based RCC works

How our RCC worksEveryone knows, understands and accepts that RCCs reflect heat away from roofs,…See More
7 hours ago
Mike Kandel posted a discussion

Earn BPI CEUs at 3rd Annual Building Performance Forum

If you're searching for BPI CEUs, you'll find plenty at the 3rd Annual Building Performance Forum…See More
12 hours ago
Mike Kandel added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Earn BPI CEUs at 3rd Annual Building Performance Forum

If you're searching for BPI CEUs, you'll find plenty at the 3rd Annual Building Performance Forum…See More
12 hours ago
Sean Lintow Sr commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"4% TOTAL Ted - Leakage to outside was stripped from the codes & for good reason"
15 hours ago
tedkidd commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"Wait!  4% total leakage or 4% leakage to outdoors? "
16 hours ago
Tom White's video was featured

Alliant Energy's PowerHouse TV: Sealing Leaky Ductwork

The PowerHouse television shows are written and produced by Alliant Energy, an energy services company based in Madison, Wis. The first PowerHouse episode was aired in September 1996 on KCRG-TV9 in Cedar Rapids, Iowa, and appears in six broadcast…
18 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service